In order to provide a green and clean factory campus, the installation of air ventilation systems is extremely necessary for today’s industrial parks.
- The basic air ventilation systems of factories in Vietnam
1.1 Natural ventilation system
1.2 Mechanical ventilation that does not uses wind channels
1.3 Cooling ventilation that uses wind channels
1.4 Ventilation system combined with cooling - Advantages of factory ventilation system
2.1 Save costs
2.2 Reduce environmental pollution
The ventilation system aims to bring a fresh environment in the factory because the factories and workshops are very dusty and polluted. Therefore, you should install the air ventilation system to ensure the environment inside of your factory is always clean and well ventilated. So which air ventilation system is the most used by factories. Read the article below to learn more about the factory ventilation systems that are being developed today.
1. The basic air ventilation systems of factories in Vietnam
Depending on the situation of the factory as well as the costs that the investor spends to select the proper air ventilation system to suit the situation of the factory.
These four types of factory ventilation system will probably suit each type of your construction:
1.1 Natural ventilation system
The method of using natural ventilation system has the advantage is the low costs and does not cost much electric motors. The disadvantage of this method is that the efficiency is not high and it is difficult for the investor to control the wind direction of the engine and the weather. If you choose to use the natural ventilation method then you need to pay attention to the these problems: You need to arrange input air louvers and exhaust louvers symmetrically to create the best effect. The louvres must be reasonably arranged with the wall and must be covered from rain.
1.2 Mechanical ventilation that does not uses wind channels
Using exhaust fans with the main role of being arranged in the position opposite the wall. On the side is the louver with mesh to filter dust or use technology filters to bring wind in from the outside .. When the exhaust fan operates this system will create a difference in pressure inside the factory, fresh air from outside will automatically bring in the air to replace exhausted emissions.
1.3 Cooling ventilation that uses wind channels
The operating principle of this method is to draw inward and outward air through the airflow. This is a method that can exhaust air by the pipes attached with a combination of exhaust fans so that it can draw in at specific locations in the total space or you can use the duct and fan combination to bring fresh air inside.
1.4 Ventilation system combined with cooling
With this method, the fresh air outside is brought inside the factory (by the cooling fan equipments). At that time, the hot air and pollutants in the factory are flushed out, thus creating a clean and well ventilated environment.
2. Advantages of factory ventilation system
2.1 Save costs
Air ventilation systems are being installed and applied in many industrial parks and factories. Factory ventilation system has significant advantages that help save costs a lot.
2.2 Reduce environmental pollution
Because factory ventilation systems are applied with solutions that follow the principle of evaporation and reduce the temperatures naturally. Therefore, this system can help protect the environment, deodorize and save electricity
If you use air conditioning system, this system will have to cool the entire space to ensure high efficiency. However, factory ventilation system can cool the necessary positions in some working places that you need and high heat generating environment such as mechanical workshops, printing workshops … This is a benefit. This is a huge advantage of this product compared to other cooling systems.
View more : What are the characteristics of air ventilation system in factory?